These interpolator units accept sinusoidal signals from rotary or linear transducers and output A/B phase signals for use by position control systems. All the units, except the MJ100/110, accept 1V p-p signals with an impedance of 120 ohms from any transducer. The MJ800 series, in addition, has a serial protocol interface dedicated for specific control and drive manufacturers.   MJ100 / MJ110 (for use with Sony Digiruler) MJ500 / MJ600 / MJ700 (general purpose) MJ820 / MJ821 (for FANUC CNCi series) MJ830 / MJ831 (for Mitsubishi MR-J2 series)